---
title: "Tank Drawing Examples: What to Send | Coastline Equipment Marine Division"
description: "What a buildable tank drawing looks like: our builder draws standard shapes for you; here's how to submit custom shapes and fitting markups that don't get sent back."
url: https://coastlinemarinetanks.com/drawing-examples
---

Our Builder Draws It For You

# Drawing examples & what to send

Most tank shops make you draw your tank. For our standard shapes, the builder draws it and you only mark where the fittings go. Here's how that works, and what to send when your tank is fully custom.

**Start with the builder.** For our five standard shapes, you may not need to draw anything. The [builder](https://coastlinemarinetanks.com/builder) generates a dimensioned drawing from your numbers as you type. It's the same drawing you see on each shape page. What we still need from you is **where the fittings go**: print the markup sheet linked under the builder's drawing (it comes filled in with your dimensions), mark each fitting, photograph it, and upload it with your estimate.

## When you do need to draw: custom shapes & markups

Fully custom shapes, unusual fitting arrangements, and old-tank matches need a drawing from you. Every submission gets sorted into one of four buckets:

### ✅Great: build-ready

Dimensions called out on every view. Fittings labeled with size and type. Orientation marked (bow/stern, port/starboard). Clean, legible labels. This tank goes straight to a construction drawing.

### 🆗Acceptable: rough but complete

Not pretty, but every dimension is there, every fitting is located, and nothing requires guessing. Pencil and a ruler on printer paper is fine. We'll take it.

### ⚠️Borderline: expect a call

Faint pencil, missing labels, arrows pointing at nothing, dimensions that don't add up. We'll call to sort it out, which delays your drawing and your tank.

### ❌Not usable: will be sent back

Blurry photos of napkin scribbles, sketches with no dimensions, “like my old one but bigger.” We can't fabricate from these, and the order pauses until we get a usable drawing.

## What every submission must show

* **Top-down view** with every fitting located and labeled (type + size)
* **End or profile view** showing heights
* **Dimensions on every view**, in inches
* **Orientation**: which end faces the bow and which side is port

CAD is welcome but never required. Pencil is fine. _Legible_ is required. We build what you send and don't guess. Drawings we can't build from get sent back before fabrication starts, not after.

Upload photos of your drawing on your estimate page when you submit it. Need help measuring first? Start with the [measuring guide](https://coastlinemarinetanks.com/measuring).

## Real examples

Four drawings customers actually sent us, with names removed. Tap any one to see it full size.

### Drawings we can build from

[![Pencil drawing of a vee-bottom tank: an aft profile and a top view, every dimension in inches, with the vent, fill, sender and ground tab located from the aft edge](https://coastlinemarinetanks.com/_astro/example-drawing-good-2.Bwl_lxQD_Z2v2WBU.webp)](https://coastlinemarinetanks.com/%5Fastro/example-drawing-good-2.Bwl%5FlxQD%5F9LaIl.jpg)

✅ Build-readyTwo views, a dimension on every edge, and every fitting located from a named edge. The notes (“vent and fill flush with aft edge”) answer the question before we have to ask it.

[![Hand sketch on graph paper of a tapered tank: a top view and an aft profile with dimensions, three labeled 1/4 inch NPT fittings, a vent, a fill, a ground tab and a cleanout](https://coastlinemarinetanks.com/_astro/example-drawing-good-1.wZ2CYqHg_2a8Ugb.webp)](https://coastlinemarinetanks.com/%5Fastro/example-drawing-good-1.wZ2CYqHg%5FU2H0B.jpg)

🆗 Rough but completeFreehand on graph paper, and that's fine. Both views are dimensioned, every fitting is labeled with its size and job, and fore/aft is marked. Every number carries its unit, so mixing millimetres and inches costs nothing.

### Drawings we'd have to call about

[![A printed three-dimensional tank outline with six dimensions and a handwritten list reading baffle?, vent, fill, out, with no fitting locations](https://coastlinemarinetanks.com/_astro/example-drawing-bad-1.BGRO1kZC_Z1ssR2b.webp)](https://coastlinemarinetanks.com/%5Fastro/example-drawing-bad-1.BGRO1kZC%5FZ2mMSks.jpg)

⚠️ Expect a callThe dimensions are there, but on a single 3-D view it's hard to tell which edge each one measures. The fittings are a list in the margin (“vent, fill, out”) with no locations, and “baffle?” is a question, not a spec.

[![A freehand sketch of a long tapered tank marked only wide and narrow, with no dimensions](https://coastlinemarinetanks.com/_astro/example-drawing-bad-2.j4Wbu-9K_2eBFPL.webp)](https://coastlinemarinetanks.com/%5Fastro/example-drawing-bad-2.j4Wbu-9K%5FZ1aiG0s.jpg)

❌ Not usable yetIt shows the shape, which helps, but there isn't a single number on it and no fittings. We can't draw from this; the order waits until the measurements arrive.
