---
title: "Tank Markup Sheet | Coastline Equipment Marine Division"
description: "A printable sheet for marking where every fitting goes on your tank, filled in with the dimensions from the tank builder."
url: https://coastlinemarinetanks.com/markup-sheet
---

Print this sheet and mark where every fitting goes. Then photograph or scan it, open your Estimate on the website, fill in your details, and upload it under Drawings & photos. A sketch on plain paper works too.

[Back to the tank builder](https://coastlinemarinetanks.com/builder)

![Coastline Equipment, Marine Division](https://coastlinemarinetanks.com/_astro/coastline-logo-light.CUCxxhng_ZdCorz.webp)

# Tank markup sheet

coastlinemarinetanks.com/contact  
[(360) 734-8509](tel:+13607348509) · ask for Marine Sales

**1\. Check the dimensions.** They're filled in from the builder.

**2\. Number every fitting** on the drawings with a dot: 1, 2, 3… The list below is started from what you picked.

**3\. Say where each one goes:** which face, and how far from the forward end, the port side, and the bottom.

**4\. Photograph or scan it** and upload it on your Estimate, under Drawings & photos.

## Top view (looking down)

## Aft end (from behind, facing forward)

## Port side (seen from outside the tank)

## Your tank

**How does it sit in the boat?**  
Length runs fore and aft, as drawn  
Length runs side to side: cross out FORWARD and AFT and write which end faces port

## Fitting list (measure to the center of each fitting, in inches)

Nothing is cut until you approve the construction drawing we send you. Coastline Equipment, Inc. · Marine Division · Bellingham, WA
