---
title: "Custom Belly Aluminum Fuel Tanks | Coastline Equipment Marine Division"
description: "Custom belly aluminum fuel tanks with sides that slope to a narrow flat bottom, keeping the pickup fed and adding gallons in shallow compartments. Online estimates from Coastline Equipment."
url: https://coastlinemarinetanks.com/tanks/belly
---

[← All tank shapes](https://coastlinemarinetanks.com/tanks)

Custom Belly Tanks

# Belly tanks: extra gallons where the bilge allows

A belly tank's long side walls slope inward below the straight sides to a narrow flat bottom that runs the full length. The belly settles into the deadrise of the hull. The deep centerline keeps the fuel pickup submerged in chop and adds capacity a flat-bottomed tank can't reach.

Every tank: 5052-H32 aluminum standard; 5086-H116 aluminum and 304 or 316L stainless steel optional · internal baffles included and sized automatically · pressure-tested before shipping · designed and manufactured to ABYC standards, meets or exceeds USCG standards.

## Good for

* Flats skiffs and shallow-draft hulls with limited tank height
* Compartments with a recess or bilge pocket under the sole
* Builds where an always-fed pickup matters more than a flat bottom

## Two extra numbers

Beyond length, width and overall height, a belly tank needs the belly drop (how tall the sloped section is) and the bottom width (the narrow flat bottom the sides slope in to). Height is the overall height, top to flat bottom, so the drop is part of it.

## The pickup sits in the belly

We put the pickup at the bottom of the belly so it stays wet when you're low on fuel and running in a chop. That's the main reason to choose this shape.

## Recent belly builds

* 710 gallon belly tank

— calculated gallons

[Build & price this tank →](https://coastlinemarinetanks.com/builder?shape=belly)

Gallons are for a 1/8″ aluminum wall. The builder adds material (aluminum or stainless steel), fittings, and options, and shows your estimate as you go.

Capacity shown is the inside volume at a 1/8″ aluminum wall, calculated from your overall dimensions, and is an estimate; the construction drawing you approve governs the final build.
