Marine Division · Bellingham, WA Mon–Thu 7:30 am–4:30 pm · Fri closed Questions? (360) 734‑8509 · Send us a message
Coastline Equipment, Marine Division - home Estimate (0)
Custom Vee Tanks

Vee-bottom tanks that follow your hull

When the tank sits on the hull itself, a vee bottom lets it nest down into the deadrise instead of bridging over it. You get more capacity, a lower center of gravity, and no wasted bilge space.

Every tank: 5052-H32 aluminum standard; 5086-H116 aluminum and 304 or 316L stainless steel optional · internal baffles included and sized automatically · pressure-tested before shipping · designed and manufactured to ABYC standards, meets or exceeds USCG standards.

Good for

  • Center consoles and bay boats with the tank on the hull bottom
  • Keel-line tanks in stepped or conventional deadrise hulls
  • Replacing an OEM vee tank without re-engineering the compartment

One extra number

A vee tank is a rectangular tank plus one measurement: the vee depth, which is how much deeper the centerline is than the sides. Height is the overall height, top to the point of the vee, so the vee depth is part of it. Measure the drop at the keel line and the calculator does the rest.

Self-locating, self-draining

A vee bottom centers itself over the keel line, and fuel runs to the low point where the pickup sits. That helps when you're running the tank down to the last few gallons.

Capacity shown is the inside volume at a 1/8″ aluminum wall, calculated from your overall dimensions, and is an estimate; the construction drawing you approve governs the final build.